Breakout MotorSports Home Page Good Morning DITB I am sure most of you know of us or have heard of Breakout Motorsports for those of you who don't I'll try to create a quick synopsis of what we do. Tuning: **We are now OBD Flashing Mk6/7 2.0t, no need to open that ECU anymore** Immo Defeats, Launch Control, Anti-Lag, Flash Tuning, Custom Tuning. Link to Car Tuning Capabilities We have more ECU tools than most shops in the area, if you need it done its more than likely we can. DYNO: Land & Sea AWD dynamometer system Our dyno has some great features that any engine geek would appreciate. SAE standard correction (or other industry standard correction factors) based on on-board weather station and inertial compensation. The wheels are unbolted and special hub adapters are fitted to mate the dyno directly to the car. There is no concern with tire spin/deformation with this system. Ability to data log 28 channels at 1,000 hz per channel. Sensors: Innovate LM-2 Wideband O2 Sensor 2x 4 Bar Map Sensors 2x K type exposed tip fast response thermocouples 2x 150psi pressure transducers for fuel or oil etc Bosch style temperature thermistors We have a few ambient air flow management devices (fans!) 13,300 cfm 42" axial flow air mover 4,000 cfm high velocity centrifugal fan Various smaller units On site support inlcudes: TIG and MIG welding equipment Fabrication equipment including chop saw, grinders, files etc Full toolbox of professional hand and power tools. Starting at $75 per hour (2WD) $90 per hour (AWD) Discounts available on 3 hours plus. Please call or email for more info. We've built a bunch of project cars from 4.2 swapped A4's to 20vt Swapped S2 clones. Most any motor you can imagine has been put into a Mk2 and there's a 9s Audi Drag Car. We have a passion for all cars not just VW/Audi if it goes fast and sounds good we're interested. Hope to help you guys out with your builds this spring!